CG-FXII Series

Feature

High speed continuous crop mark detection

An optical sensor enables automatic consecutive detection of crop marks throughout the nested image which the Inkjet printer prints, in combination with the automatic adjustment function to obtain precise contour cutting.

By continuously detecting a maximum of 4 points, nested images in both X axis and Y axis can be cut aligning each image automatically.

Engineered Head Unit

Media secara otomatis dipotong dengan pemotong lembaran standar

Other functions

• Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
• Selectable three jog speeds ensure proper and easy positioning of the head to the point.
• Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
• Media can be loaded from back or front.
• Up to 6 roll media can be set at a time(1 set standard).
• Plug-in cutting software for CorelDRAW and Illustrator is included.
• A special adaptor to use commercially available pens and USB interface are included.

 

Specification

Specifications

		CG-75FXII	CG-130FXII	CG-160FXII
Acceptable sheet width		90mm~1,040mm (3.54"~40.9")	90mm~1,580mm (3.54"~62.0")	90mm~1,880mm (3.54”~74”)
Acceptable roll sheet		Outer less than φ200mm , Roll weight less than 18kg		Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1		760mm x 51m(29.9" x 167')	1,300mm x 51m(51.2" x 167')	1,600mm×51m(62.9”×167’)
Maximum auto cutting width*2		870mm (34.2”)	1,425mm (56.1”)	1,720mm (67.7”)
Maximum cutting speed		100cm/s (39.3"/s)
Maximum moving speed		140cm/s (55"/s)
Adjustable speed range*3		1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution		5µm(0.0002")
Command resolution		25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability		±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Tekanan pen		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pouncing	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4		Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing*5		Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Type of command		MGL-IIc
Interface		RS-232C,USB
Receiver buffer size		30MB Standard (20MB when in sorting)
Operational	Temperature	5~35°C (41~95°F)
	Humidity	35~75%(Rh) Non-condensation
Power requirement		AC100V~240V
Power consumption		145VA or less
Dimensions (WxDxH)		1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9")	1,825mm(71.8")x 700mm(27.5")x 1,217mm(47.9")	2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9")
Weight (with stands)		50kg(110 lbs.)	60kg(132 lbs.)	69kg(152 lbs.)

*1: Maximum sheet feeding length differs depending on the software.
*2:Sheet width to cut off from the roll.
*3:Restricted sheet width.
*4:Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
*5:Pouncing tool intended specifically for pouncing shall be used.
*6:The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.

• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of the respective owners.