JV150 Series

Feature

Mimaki's superior print-image quality control technology

Highly-assured inkjet technology

Each ink color has its own specific gravity and viscosity. To achieve precise placement of the ink droplets onto the media, Mimaki designed an optimum waveform that allows the printhead to jet each ink color at the appropriate jetting angle without losing excellent ink droplet circularity. Moreover, various ink droplet sizes are precisely placed from the minimum size 4pl to the maximum size 35pl. Small droplets create beautiful high-resolution printing, and large droplets are very useful for high-speed printing. Thus, the JV150 satisfies a wide range of needs including beautiful high-quality printing and productive high-speed printing.

Mimaki Advanced Pass System 3 (MAPS3) delivers stable high-quality printing

Generally, swath boundaries are straight lines. Therefore, a slight misalignment between boundaries causes banding or uneven color printing. MAPS3 reduces banding and uneven color printing with blurred boundaries similar to gradation printing.

 

Three-way intelligent heater system optimizes the ink droplets size.

---

When the temperature of the media is not optimized, the perfect shape and size of droplets are not appropriately adhered onto the media. A patented three-way intelligent heater is built into the JV150, and each heater maintains the temperature appropriately to obtain high-quality printing. The details of each heater are given in Figures below.

■Patent number■　 Japan: 4889059　　USA: 8,444,262　　China: ZL 200910222559.8

---

① Pre-heater
Preheats the media to the appropriate temperature before printing.

② Print-heater
Maintains the temperature to produce vibrant colors and improves adhesion of ink droplets onto the media.

③ Post-heater
Enhances ink dryness, prevents ink bleeding, and secures stable media take-up.

Solutions for uninterrupted print operation

---

Quick-dry SS21 ink that achieves outstanding speed

SS21 ink was developed through the concentrated knowledge and technology of Mimaki. The SS21 ink dries quickly on the media due to a good balance between ink penetration and solvent volatilization. High productivity is achieved through high-density printing at high-speed modes without blocking and bleeding.

Nozzle check unit (NCU) automatically detects clogged nozzles and unclogs them.

Clogged nozzles are detected automatically by monitoring ink droplets with sensors. When clogged nozzles are found, the nozzles are automatically cleaned. A monitoring interval is set for each print dataset at specified time intervals. The NCU reduces waste printing after the occurrence of clogged nozzles.

Nozzle recovery system (NRS) for maintaining productivity

Previously, when the issue was not resolved after nozzle cleaning, the printhead needed to be repaired by a technician, and printing operation had to be stopped until the maintenance work was completed. The NRS allows the printer to continue print operations without interruption by using non-defective nozzles as substitutes for defective nozzles until the technician arrives.

SS21 ink creates value-added printings

---

Orange ink broadens the range of color representation.

By using the newly developed SS21 orange ink as a process color, 94.8% of the PANTONE color chart is covered with approximate colors. Thanks to a wider gamut with the orange ink, food freshness can be simulated, and corporate colors can be faithfully represented.

Light black ink assists in beautiful monochrome image printing.

---

The newly developed SS21 light black ink and superior gray-balance control produce accurate grayscale printing without unexpected color shifts. Smooth and non-grainy skin tones and grayscale gradation are delivered.

Safety low odor eco-solvent ink [ES3]

Safeness, low odor and high- weatherability are achieved with relatively low polarity solvent.
Unlike water-based inks, the ES3 doesn't require coated media for printing and thus a production becomes more cost effective.

Sublimation ink Sb53 achieves high-density printing.

Sb53 ink is a sublimation ink that produces bright colors and enables high-density printing. The ideal print material is polyester, which is used for apparel fabric, sports uniforms, and swimsuits.

 

Specification

		JV150-130	JV150-160
Printhead		On-demand piezo head (2 staggered printheads)
Print resolution		360dpi, 540dpi, 720dpi, 1,080dpi, and 1,440dpi
Maximum print width		1,361mm (53.6")	1,610mm (63.4")
Maximum media width		1,371mm (54.0")	1,620mm (63.8")
Ink	Type/Color	Eco-solvent ink ・SS21（C,M,Y,K,Lc,Lm,Lk, and Or） ・BS3（C,M,Y, and K） only available in emerging countries ・BS4（C,M,Y, and K） only available in emerging countries ・ES3（C,M,Y,K,Lc, and Lm） Sublimation ink ・Sb53（Bl,M,Y,K/Dk,Lbl, and Lm） ・Sb54（Bl,M,Y,K,Lbl, and Lm）
	Package size *1	SS21: 440ml Ink cartridge / 2L Ink pack BS3, BS4: 600ml Ink pack / 2L Ink pack ES3: 440ml Ink cartridge Sb53, Sb54: 440ml Ink cartridge / 2L Ink pack
	Circulation system *2	White ink circulation using Mimaki Circulation Technology (MCT)
Media thickness		1.0mm or less
Rolled media weight		40kg (88 lb) or less
Certifications		VCCI class A, FCC class A, ETL UL 60950-1 CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, Energy Star, RCM (CCC is in the process of being acquired.)
Interface		USB 2.0, LAN
Power supply		Single-phase (AC 100–120V / AC 220–240V) ×2
Power consumption		1,440W×2 or less (at AC 100V system) 1,920W×2 or less (at AC 200V system)
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing)
Dimensions (W×D×H)		2,525mm×700mm×1,392mm (99"×28"×55")	2,775mm×700mm×1,392mm (109"×28"×55")
Weight		160 kg (353 lb)	185 kg (408 lb)

*1 Optional Mimaki bulk ink system 3 (MBIS3) is required for using 2L Ink pack.

Ink set

SS21 ［C,M,Y,K,Lc,Lm,Lk,Or］	C　M　Y　K
	C　M　Y　K　Lc　Lm　Lk　Or
	C　M　Y　K　Lc　Lm　W
	C　M　Y　K　Lk　Or　W
BS3 ［C,M,Y,K］	C　M　Y　K
BS4 ［C,M,Y,K］	C　M　Y　K
ES3 ［C,M,Y,K,Lc,Lm］	C　M　Y　K
	C　M　Y　K　Lc　Lm
	C　M　Y　K　Lc　Lm　W
Sb53 ［Bl,M,Y,K/Dk,Lbl,Lm］	Bl　M　Y　K/Dk
	Bl　M　Y　K/Dk　Lbl　Lm
Sb54 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K
	Bl　M　Y　K　Lbl　Lm

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

Corresponding Ink